Starting esp32_cam

esp32_cam1.yaml

@@ -0,0 +1,58 @@
+esphome:
+  name: esp32_cam1
+  platform: ESP32
+  board: esp32cam
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Purple Fallback Hotspot"
+    password: "QNWj7LmaNoD6"
+  manual_ip:
+    # Set this to the IP of the ESP
+    static_ip: 192.168.87.17
+    # Set this to the IP address of the router. Often ends with .1
+    gateway: 192.168.86.1
+    # The subnet of the network. 255.255.255.0 works for most home networks.
+    subnet: 255.255.254.0
+
+captive_portal:
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+i2c:
+   - id: bus_a
+     sda: 13
+     scl: 16
+     scan: True
+
+
+#i2c:
+#  sda: D2
+#  scl: D1
+#  scan: True
+#  id: bus_a
+
+sensor:
+  - platform: bme280
+    temperature:
+      name: "esp32_cam1_BME280 Temperature"
+      oversampling: 16x
+    pressure:
+      name: "esp32_cam1_BME280 Pressure"
+    humidity:
+      name: "esp32_cam1_BME280 Humidity"
+    address: 0x76
+    i2c_id: bus_a
+    update_interval: 60s
+
+   

esp32_cam1/partitions.csv

@@ -0,0 +1,6 @@
+nvs,      data, nvs,     0x009000, 0x005000,
+otadata,  data, ota,     0x00e000, 0x002000,
+app0,     app,  ota_0,   0x010000, 0x1C0000,
+app1,     app,  ota_1,   0x1D0000, 0x1C0000,
+eeprom,   data, 0x99,    0x390000, 0x001000,
+spiffs,   data, spiffs,  0x391000, 0x00F000

write_esp32_cam1

@@ -0,0 +1 @@
+esphome esp32_cam1.yaml run --upload-port /dev/ttyUSB0