substitutions:
  device_name: bedroom_tkm_lily1
  device_ip: 192.168.87.44

esphome:
  name: ${device_name}
  platform: ESP32
  board: esp32dev
  on_boot:
    - priority: 900 #900 tried down to 500
      then:
        - lambda: |-
            id(wake_up_reason) = log(esp_sleep_get_ext1_wakeup_status())/log(2);

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  manual_ip:
    static_ip: ${device_ip}
    gateway: 192.168.86.1
    subnet: 255.255.254.0
  fast_connect: True

# captive_portal:

# Enable logging
logger:
    level: INFO

# Enable Home Assistant API
api:

ota:
<<: !include standard_mqtt.yaml
# mqtt:
#   broker: !secret mqtt_broker
#   discovery: True
#   username: !secret mqtt_username
#   password: !secret mqtt_password
#   # keepalive: 2s
#   birth_message:
#           topic: ${device_name}/status
#           payload: coming_online_birth
#   will_message:
#           topic: ${device_name}/status
#           payload: going_offline_will
#   on_message:
#     topic: ${device_name}/ota_mode
#     payload: 'ON'
#     then:
#       - deep_sleep.prevent: deep_sleep_1

deep_sleep:
        run_duration: 20s
        sleep_duration: 40s #24h
        esp32_ext1_wakeup: 
                pins: 
                  - 33 #yellow
                  - 34 #orange
                  - 35 #green
                mode: ANY_HIGH
        id: deep_sleep_1

globals:
        - id: wake_up_reason
          type: int
          restore_value: no
          initial_value: '0'
sensor:
  - platform: template
    name: "Remote Control Wake Reason"
    accuracy_decimals: 0
    lambda: |-
            return id(wake_up_reason);

binary_sensor:
  - platform: gpio
    pin: 
        number: GPIO33
        mode: INPUT_PULLUP
    # filters:
      # - delayed_on: 10ms ### <---- debounce time, was 100ms
      # - delayed_off: 10s ### <---- delay to capture state change on wake up         
    name: "TKM Test 33 (yellow)"
    id: tkm_test_33
  - platform: gpio
    pin: 
        number: GPIO34
        mode: INPUT_PULLUP
    name: "TKM Test 34 (orange)"
    id: tkm_test_34
  - platform: gpio
    pin: 
        number: GPIO35
        mode: INPUT_PULLUP
    name: "TKM Test 35 (green)"
    id: tkm_test35