esphome:
  name: esp32_cam1
  platform: ESP32
  board: esp32cam

wifi:
  ssid: "Meneely"
  password: "punxsutawney1"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Purple Fallback Hotspot"
    password: "QNWj7LmaNoD6"
  manual_ip:
    # Set this to the IP of the ESP
    static_ip: 192.168.87.17
    # Set this to the IP address of the router. Often ends with .1
    gateway: 192.168.86.1
    # The subnet of the network. 255.255.255.0 works for most home networks.
    subnet: 255.255.254.0

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

esp32_camera:
  external_clock:
    pin: GPIO0
    frequency: 20MHz
  i2c_pins:
    sda: GPIO26
    scl: GPIO27
  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
  vsync_pin: GPIO25
  href_pin: GPIO23
  pixel_clock_pin: GPIO22
  power_down_pin: GPIO32

  # Image settings
  name: ESP32_Cam1
  resolution: 640x480
  jpeg_quality: 20

i2c:
   - id: bus_a
     sda: GPIO03
     scl: GPIO01
     scan: True


sensor:
  - platform: bme280
    temperature:
      name: "ESP32_Cam1_BME280 Temperature"
      oversampling: 16x
    pressure:
      name: "ESP32_Cam1_BME280 Pressure"
    humidity:
      name: "ESP32_Cam1_BME280 Humidity"
    address: 0x76
    update_interval: 60s
    i2c_id: bus_a
  - platform: bh1750
    name: "ESP32_Cam1_BH1750 Illuminance"
    address: 0x23
    measurement_time: 69
    update_interval: 60s
    i2c_id: bus_a