esphome:
  name: shelly1_1
  platform: ESP8266
  board: esp01_1m

wifi:
  ssid: "Meneely"
  password: "punxsutawney1"
  power_save_mode: none

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Shelly1_1 Fallback Hotspot"
    password: "QNWj7LmaNoD6"
  manual_ip:
    # Set this to the IP of the ESP
    static_ip: 192.168.87.21
    # Set this to the IP address of the router. Often ends with .1
    gateway: 192.168.86.1
    # The subnet of the network. 255.255.255.0 works for most home networks.
    subnet: 255.255.254.0

# Enable logging
logger:
    level: debug

# Enable Home Assistant API
api:

ota:

# Device Specific Config
output:
  - platform: gpio
    pin: GPIO4
    id: shelly_1_relay

light:
  - platform: binary
    name: "Living Room Light (Shelly)"
    output: shelly_1_relay
    id: lightid

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO5
      #mode: INPUT_PULLUP
      #inverted: True
    name: "Switch Shelly 1"
    on_state:
      then:
        - light.toggle: lightid
    internal: true
    id: switchid