Changing LR Brightness to MQTT in YAML

bedroom_tkm1.yaml

@@ -1,100 +1,28 @@
+substitutions:
+  device_name: bedroom_tkm1
+  device_ip: 192.168.87.36
+
 esphome:
-  name: bedroom_tkm1
+  name: ${device_name}
   platform: ESP32
   board: wemos_d1_mini32 #esp-wrover-kit
-  on_boot:
-    - priority: 900 #900 tried down to 500
-      then:
-        - lambda: |-
-            id(wake_up_reason) = esp_sleep_get_ext1_wakeup_status();
-  
-  #   - priority: 901 #900 tried down to 500
-  #     then:
-  #       - lambda: |-
-  #               esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
-  #               gpio_pullup_dis(GPIO_NUM_33);
-  #               gpio_pulldown_en(GPIO_NUM_33);
-  #               gpio_pullup_dis(GPIO_NUM_34);
-  #               gpio_pulldown_en(GPIO_NUM_34);
-  #               gpio_pullup_dis(GPIO_NUM_35);
-  #               gpio_pulldown_en(GPIO_NUM_35);
-
-wifi:
-  ssid: "Meneely"
-  password: "punxsutawney1"
-  manual_ip:
-    static_ip: 192.168.87.36
-    gateway: 192.168.86.1
-    subnet: 255.255.254.0
-  fast_connect: True
-
-# captive_portal:
 
+<<: !include standard_wifi.yaml
 logger:
     level: INFO
 api:
 ota:
-
+# <<: !include standard_mqtt_deepsleep.yaml
-mqtt:
-  broker: 192.168.86.99
-  discovery: True
-  username: ha
-  password: lorrie
-  # keepalive: 2s
-  birth_message:
-          topic: bedroom_tkm1/status
-          payload: coming_online_birth
-  will_message:
-          topic: bedroom_tkm1/status
-          payload: going_offline_will
-  on_message:
-    topic: bedroom_tkm1/ota_mode
-    payload: 'ON'
-    then:
-      - deep_sleep.prevent: deep_sleep_1
-
 deep_sleep:
-        run_duration: 20s
+        run_duration: 12s
-        sleep_duration: 40s #24h
+        sleep_duration: 5min #10s #24h
-        esp32_ext1_wakeup: 
-                pins: 
-                  - 33 #yellow
-                  - 34 #orange
-                  - 35 #white
-                mode: ANY_HIGH
         id: deep_sleep_1
 
-globals:
+# Example configuration entry
-        - id: wake_up_reason
-          type: int
-          restore_value: no
-          initial_value: '0'
 sensor:
-  - platform: template
+  - platform: adc
-    name: "Remote Control Wake Reason"
+    pin: 34
-    accuracy_decimals: 0
+    name: "Living Room Brightness"
-    lambda: |-
+    update_interval: 5s
-            return id(wake_up_reason);
+    id: lr_bright01
-
+    attenuation: 11db
-binary_sensor:
-  - platform: gpio
-    pin: 
-        number: GPIO33
-        mode: INPUT_PULLUP
-    # filters:
-      # - delayed_on: 10ms ### <---- debounce time, was 100ms
-      # - delayed_off: 10s ### <---- delay to capture state change on wake up         
-    name: "TKM Test 33 (yellow)"
-    id: tkm_test_33
-  - platform: gpio
-    pin: 
-        number: GPIO34
-        mode: INPUT_PULLUP
-    name: "TKM Test 34 (orange)"
-    id: tkm_test_34
-  - platform: gpio
-    pin: 
-        number: GPIO35
-        mode: INPUT_PULLUP
-    name: "TKM Test 35 (white)"
-    id: tkm_test_35

chip_list_esp32.txt

@@ -1,9 +1,10 @@
 Name in ESPHome     IP assigned     Board                   Chip ID                     Description
-bigblue1            192.168.87.31   ESP32/esp-wrover-kit    ESP32D0WDQ5 (revision 1)    Battery shield, 18650
+DEFUNCT bigblue1            192.168.87.31   ESP32/esp-wrover-kit    ESP32D0WDQ5 (revision 1)    Battery shield, 18650
-bedroom_tkm1        192.168.87.36   ESP32/wemos_d1_mini32   ESP32D0WDQ6 (revision 1)    D1 mini, 4xAmazon 2021-01-20. Doesn't give pin ID used to wake from deep sleep
+DEFUNCT bedroom_tkm1        192.168.87.36   ESP32/wemos_d1_mini32   ESP32D0WDQ6 (revision 1)    D1 mini, 4xAmazon 2021-01-20. Doesn't give pin ID used to wake from deep sleep
 esp32_cam1          192.168.87.17   ESP32/esp32cam                                      ESP32-CAM, 2xAmazon 2020-12-17
 sonoffmini_1        192.168.87.41   ESP8266/esp01_1m                                    Sonoff Mini - Now on Tim's nightstand
 bedroom_tkm_lily1   192.168.87.44   esp32dev                                            ESP32 LilyGo T7 V1.5, with USB and battery
 sonoffmini_45       192.168.87.45   ESP8266/esp01_1m                                    Sonoff Mini - Now on Lorrie's nightstand
 bedroom_tkm_lily2   192.168.87.47   esp32dev                                            ESP32 LilyGo T7 V1.3, with USB and battery
 bedroom_tkm_lily1   192.168.87.48   esp32dev                                            ESP32 LilyGo T7 V1.5, with USB and battery
+lr_bright_87_49     192.168.87.49   ESP32/wemos_d1_mini32

lr_bright_87_49.yaml

@@ -0,0 +1,26 @@
+substitutions:
+  device_name: lr_bright_87_49
+  device_ip: 192.168.87.49
+
+esphome:
+  name: ${device_name}
+  platform: ESP32
+  board: wemos_d1_mini32
+
+<<: !include standard_wifi.yaml
+# logger:
+#     level: INFO
+# api:
+ota:
+<<: !include standard_mqtt_deepsleep.yaml
+deep_sleep:
+        run_duration: 2s
+        sleep_duration: 9min #40s #24h
+        id: deep_sleep_1
+sensor:
+  - platform: adc
+    pin: 34
+    name: "Living Room Brightness"
+    update_interval: 1s
+    id: lr_bright01
+    attenuation: 11db

lr_bright_87_49/partitions.csv

@@ -0,0 +1,6 @@
+nvs,      data, nvs,     0x009000, 0x005000,
+otadata,  data, ota,     0x00e000, 0x002000,
+app0,     app,  ota_0,   0x010000, 0x1C0000,
+app1,     app,  ota_1,   0x1D0000, 0x1C0000,
+eeprom,   data, 0x99,    0x390000, 0x001000,
+spiffs,   data, spiffs,  0x391000, 0x00F000

write_lr_bright

@@ -0,0 +1 @@
+esphome lr_bright_87_49.yaml run --upload-port /dev/ttyS9