Implementing nightstands

bedroom_lilygo_t7v15.yaml

@@ -46,8 +46,8 @@ binary_sensor:
     pin: 
         number: GPIO33
         mode: INPUT_PULLUP
-    # filters:
+    filters:
-      # - delayed_on: 10ms ### <---- debounce time, was 100ms
+      - delayed_on: 100ms ### <---- debounce time, was 100ms
       # - delayed_off: 10s ### <---- delay to capture state change on wake up         
     name: "TKM Test 33 middle button"
     id: tkm_test_33
@@ -56,7 +56,7 @@ binary_sensor:
         number: GPIO34
         mode: INPUT_PULLUP
     filters:
-      - delayed_on: 10ms ### <---- debounce time, was 100ms
+      - delayed_on: 100ms ### <---- debounce time, was 100ms
       # - delayed_off: 10s ### <---- delay to capture state change on wake up             
     name: "TKM Test 34 T button"
     id: tkm_test_34
@@ -64,5 +64,7 @@ binary_sensor:
     pin: 
         number: GPIO35
         mode: INPUT_PULLUP
+    filters:
+      - delayed_on: 100ms ### <---- debounce time, was 100ms
     name: "TKM Test 35 L button"
     id: tkm_test35

chip_list_esp32.txt

@@ -3,4 +3,5 @@ bigblue1            192.168.87.31   ESP32/esp-wrover-kit    ESP32D0WDQ5 (revisio
 bedroom_tkm1        192.168.87.36   ESP32/wemos_d1_mini32   ESP32D0WDQ6 (revision 1)    D1 mini, 4xAmazon 2021-01-20. Doesn't give pin ID used to wake from deep sleep
 esp32_cam1          192.168.87.17   ESP32/esp32cam                                      ESP32-CAM, 2xAmazon 2020-12-17
 bedroom_tkm_lily1   192.168.87.44                                                       ESP32 LilyGo T7 V1.5, with USB and battery
-sonoffmini_1        192.168.87.41   ESP8266/esp01_1m                                    Sonoff Mini
+sonoffmini_1        192.168.87.41   ESP8266/esp01_1m                                    Sonoff Mini - Now on Tim's nightstand
+sonoffmini_45       192.168.87.45   ESP8266/esp01_1m                                    Sonoff Mini - Now on Lorrie's nightstand

sonoff_mini45.yaml

@@ -0,0 +1,96 @@
+substitutions:
+  device_name: sonoffmini_45
+  device_ip: 192.168.87.45
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+  manual_ip:
+    static_ip: ${device_ip}
+    gateway: 192.168.86.1
+    subnet: 255.255.255.0
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "ESPHOME"
+    password: "12345678"
+
+logger:
+  
+api:
+  reboot_timeout: 15min
+
+ota:
+
+# the web_server & sensor components can be removed without affecting core functionaility.
+
+web_server:
+  port: 80
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name} Wifi Signal Strength
+    update_interval: 60s
+  - platform: uptime
+    name: ${device_name} Uptime
+
+#######################################
+# Device specific Config Begins Below #
+#######################################
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO00 # The built-in switch
+    id: reset
+    internal: true
+    filters:
+      - invert:
+      - delayed_off: 10ms
+    on_press:
+      - switch.toggle:
+          id: relay_1
+
+  - platform: gpio
+    name: ${device_name}_status
+    pin: GPIO04 # The external terminals
+    id: switch_1
+    filters:
+      - delayed_on: 100ms
+    on_press:
+      then:
+        - switch.toggle:
+            id: relay_1
+            #    on_release:
+            #      then:
+            #        - switch.toggle:
+            #            id: relay_1
+
+switch:
+  - platform: gpio
+    name: ${device_name}_switch
+    icon: "mdi: lightbulb_outline"
+    pin: GPIO12
+    id: relay_1
+    restore_mode: restore_default_off
+
+status_led:
+  pin:
+    number: GPIO13
+    inverted: true
+
+output:
+  - platform: esp8266_pwm
+    id: blue_led
+    pin: GPIO13
+    inverted: True
+
+light:
+  # the 4 lines below define the Blue LED light on Sonoff Mini, to expose in HomeAssistant remove line "internal: true"
+  - platform: monochromatic
+    name: ${device_name}_blueled
+    output: blue_led
+    internal: true # hides the Blue LED from HomeAssistant