General update, getting ready to move

Personal (Web).url

@@ -0,0 +1,39 @@
+esphome:
+  name: esp32-bluetooth-proxy
+  friendly_name: Bluetooth Proxy
+  min_version: 2025.8.0
+  name_add_mac_suffix: true
+
+esp32:
+  variant: esp32
+  framework:
+    type: esp-idf
+
+wifi:
+  ap:
+
+api:
+logger:
+
+ota:
+  - platform: esphome
+    id: ota_esphome
+
+esp32_ble_tracker:
+  scan_parameters:
+    # We currently use the defaults to ensure Bluetooth
+    # can co-exist with WiFi In the future we may be able to
+    # enable the built-in coexistence logic in ESP-IDF
+    active: true
+
+bluetooth_proxy:
+  active: true
+
+button:
+  - platform: safe_mode
+    id: button_safe_mode
+    name: Safe Mode Boot
+
+  - platform: factory_reset
+    id: factory_reset_btn
+    name: Factory reset

bluetooth_proxy.yaml

@@ -0,0 +1,31 @@
+substitutions:
+  name: meneely-bluetooth-proxy1
+
+esphome:
+  name: ${name}
+  name_add_mac_suffix: false
+
+esp32:
+  variant: esp32s3
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: Meneely
+  password: punxsutawney1
+#  ssid: !secret wifi_ssid
+#  password: !secret wifi_password
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  platform: esphome
+
+esp32_ble_tracker:
+
+bluetooth_proxy:
+  active: true

bluetooth_proxy2.yaml

@@ -0,0 +1,44 @@
+esphome:
+  name: esp32-bluetooth-proxy
+  friendly_name: Bluetooth Proxy
+  min_version: 2025.8.0
+  name_add_mac_suffix: true
+
+esp32:
+  variant: esp32s3
+  framework:
+    type: esp-idf
+
+wifi:
+  ssid: Meneely-IoT
+  password: punxsutawney1
+#  ssid: !secret wifi_ssid
+#  password: !secret wifi_password
+  ap:
+web_server:
+
+api:
+logger:
+
+ota:
+  - platform: esphome
+    id: ota_esphome
+
+esp32_ble_tracker:
+  scan_parameters:
+    # We currently use the defaults to ensure Bluetooth
+    # can co-exist with WiFi In the future we may be able to
+    # enable the built-in coexistence logic in ESP-IDF
+    active: true
+
+bluetooth_proxy:
+  active: true
+
+button:
+  - platform: safe_mode
+    id: button_safe_mode
+    name: Safe Mode Boot
+
+  - platform: factory_reset
+    id: factory_reset_btn
+    name: Factory reset

laundry/sonoff-s31e.yaml

@@ -0,0 +1,71 @@
+substitutions:
+  device_name: sonoff-s31e
+  # device_ip: 192.168.87.75
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+  on_boot: 
+  - switch.turn_on: relay  
+  #  platformio_options:
+  #    upload_speed: 115200 #baud, tagging this so grep will find it later  
+
+#<<: !include standard_wifi.yaml
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+#   manual_ip:
+# #    static_ip: ${device_ip}
+#     gateway: 192.168.86.1
+#     subnet: 255.255.254.0
+  fast_connect: True
+
+logger:
+  baud_rate: 0 # (UART logging interferes with cse7766)
+  
+api:
+  # reboot_timeout: 15min
+
+ota:
+
+# Device Specific Config
+
+uart:
+  rx_pin: RX
+  baud_rate: 4800
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: ${device_name}_button
+    on_press:
+      - switch.toggle: relay
+  - platform: status
+    name: ${device_name}_status
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name}_wifi
+    update_interval: 60s
+  - platform: cse7766
+    current:
+      name: ${device_name}_current
+      accuracy_decimals: 1
+    voltage:
+      name: ${device_name}_voltage
+      accuracy_decimals: 1
+    power:
+      name: ${device_name}_power
+      accuracy_decimals: 1
+switch:
+  - platform: gpio
+    name: ${device_name}_relay
+    pin: GPIO12
+    id: relay
+
+status_led:
+  pin: GPIO13

laundry/sonoff-s31f.yaml

@@ -0,0 +1,71 @@
+substitutions:
+  device_name: sonoff-s31f
+  # device_ip: 192.168.87.75
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+  on_boot: 
+  - switch.turn_on: relay  
+  #  platformio_options:
+  #    upload_speed: 115200 #baud, tagging this so grep will find it later  
+
+#<<: !include standard_wifi.yaml
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+#   manual_ip:
+# #    static_ip: ${device_ip}
+#     gateway: 192.168.86.1
+#     subnet: 255.255.254.0
+  fast_connect: True
+
+logger:
+  baud_rate: 0 # (UART logging interferes with cse7766)
+  
+api:
+  # reboot_timeout: 15min
+
+ota:
+
+# Device Specific Config
+
+uart:
+  rx_pin: RX
+  baud_rate: 4800
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: ${device_name}_button
+    on_press:
+      - switch.toggle: relay
+  - platform: status
+    name: ${device_name}_status
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name}_wifi
+    update_interval: 60s
+  - platform: cse7766
+    current:
+      name: ${device_name}_current
+      accuracy_decimals: 1
+    voltage:
+      name: ${device_name}_voltage
+      accuracy_decimals: 1
+    power:
+      name: ${device_name}_power
+      accuracy_decimals: 1
+switch:
+  - platform: gpio
+    name: ${device_name}_relay
+    pin: GPIO12
+    id: relay
+
+status_led:
+  pin: GPIO13

laundry/t/sonoff-s31christmas.yaml

@@ -0,0 +1,61 @@
+substitutions:
+  device_name: sonoff-s31christmas
+  device_ip: 192.168.87.74
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+  #  platformio_options:
+  #    upload_speed: 115200 #baud, tagging this so grep will find it later  
+
+<<: !include standard_wifi.yaml
+
+logger:
+  baud_rate: 0 # (UART logging interferes with cse7766)
+  
+api:
+  # reboot_timeout: 15min
+
+ota:
+
+# Device Specific Config
+
+uart:
+  rx_pin: RX
+  baud_rate: 4800
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: ${device_name}_button
+    on_press:
+      - switch.toggle: relay
+  - platform: status
+    name: ${device_name}_status
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name}_wifi
+    update_interval: 60s
+  - platform: cse7766
+    current:
+      name: ${device_name}_current
+      accuracy_decimals: 1
+    voltage:
+      name: ${device_name}_voltage
+      accuracy_decimals: 1
+    power:
+      name: ${device_name}_power
+      accuracy_decimals: 1
+switch:
+  - platform: gpio
+    name: ${device_name}_relay
+    pin: GPIO12
+    id: relay
+
+status_led:
+  pin: GPIO13

laundry/t/sonoff_s31a.yaml

@@ -0,0 +1,61 @@
+substitutions:
+  device_name: sonoff_s31a
+  device_ip: 192.168.87.71
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+  #  platformio_options:
+  #    upload_speed: 115200 #baud, tagging this so grep will find it later  
+
+<<: !include standard_wifi.yaml
+
+logger:
+  baud_rate: 0 # (UART logging interferes with cse7766)
+  
+api:
+  # reboot_timeout: 15min
+
+ota:
+
+# Device Specific Config
+
+uart:
+  rx_pin: RX
+  baud_rate: 4800
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: ${device_name}_button
+    on_press:
+      - switch.toggle: relay
+  - platform: status
+    name: ${device_name}_status
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name}_wifi
+    update_interval: 60s
+  - platform: cse7766
+    current:
+      name: ${device_name}_current
+      accuracy_decimals: 1
+    voltage:
+      name: ${device_name}_voltage
+      accuracy_decimals: 1
+    power:
+      name: ${device_name}_power
+      accuracy_decimals: 1
+switch:
+  - platform: gpio
+    name: ${device_name}_relay
+    pin: GPIO12
+    id: relay
+
+status_led:
+  pin: GPIO13

laundry/t/sonoff_s31b.yaml

@@ -0,0 +1,61 @@
+substitutions:
+  device_name: sonoff_s31b
+  device_ip: 192.168.87.72
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+  #  platformio_options:
+  #    upload_speed: 115200 #baud, tagging this so grep will find it later  
+
+<<: !include standard_wifi.yaml
+
+logger:
+  baud_rate: 0 # (UART logging interferes with cse7766)
+  
+api:
+  # reboot_timeout: 15min
+
+ota:
+
+# Device Specific Config
+
+uart:
+  rx_pin: RX
+  baud_rate: 4800
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO0
+      mode: INPUT_PULLUP
+      inverted: True
+    name: ${device_name}_button
+    on_press:
+      - switch.toggle: relay
+  - platform: status
+    name: ${device_name}_status
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name}_wifi
+    update_interval: 60s
+  - platform: cse7766
+    current:
+      name: ${device_name}_current
+      accuracy_decimals: 1
+    voltage:
+      name: ${device_name}_voltage
+      accuracy_decimals: 1
+    power:
+      name: ${device_name}_power
+      accuracy_decimals: 1
+switch:
+  - platform: gpio
+    name: ${device_name}_relay
+    pin: GPIO12
+    id: relay
+
+status_led:
+  pin: GPIO13

lora1.yaml

@@ -0,0 +1,92 @@
+esphome:
+  name: "heltec"
+
+esp32:
+  variant: esp32s3
+  flash_size: 8MB
+  cpu_frequency: 240MHZ
+  framework:
+    type: esp-idf
+
+logger:
+  hardware_uart: UART0
+
+api:
+
+ota:
+  platform: esphome
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+# SPI bus for LoRa radio
+spi:
+  clk_pin: GPIO9
+  mosi_pin: GPIO10
+  miso_pin: GPIO11
+
+# I2C for OLED display
+i2c:
+  sda: GPIO17
+  scl: GPIO18
+  frequency: 400kHz
+
+# FSK Radio Configuration (SX1262)
+sx126x:
+  dio1_pin: GPIO14
+  cs_pin: GPIO8
+  busy_pin: GPIO13
+  rst_pin: GPIO12
+  pa_power: 3
+  bandwidth: 78_2kHz
+  crc_enable: true
+  frequency: 433920000
+  modulation: FSK
+  rx_start: true
+  payload_length: 0
+  hw_version: sx1262
+  bitrate: 4800
+  rf_switch: true
+  sync_value: [0x33, 0x33]
+  preamble_size: 4
+  preamble_detect: 2
+  tcxo_voltage: 1_8V
+  tcxo_delay: 5ms
+  on_packet:
+    then:
+      - lambda: |-
+          ESP_LOGD("fsk", "Packet RSSI: %.2f dBm, SNR: %.2f dB, Data: %s",
+                   rssi, snr, format_hex(x).c_str());
+
+button:
+  - platform: template
+    name: "Send FSK Packet"
+    on_press:
+      then:
+        - sx126x.send_packet:
+            data: [0xC5, 0x51, 0x78, 0x82, 0xB7, 0xF9, 0x9C, 0x5C]
+
+# OLED Display
+
+display:
+  - platform: ssd1306_i2c
+    model: "SSD1306 128x64"
+    reset_pin: GPIO21
+    address: 0x3C
+    lambda: |-
+      it.printf(0, 0, id(font1), "Heltec V3");
+      it.printf(0, 16, id(font1), "WiFi LoRa 32");
+      it.printf(0, 32, id(font1), "%.1f dBm", id(wifi_signal_db).state);
+
+font:
+  - file: "gfonts://Roboto"
+    id: font1
+    size: 14
+
+sensor:
+  - platform: wifi_signal
+    id: wifi_signal_db
+    name: "WiFi Signal"
+    update_interval: 60s
+

tkm.yaml

@@ -0,0 +1,96 @@
+substitutions:
+  device_name: sonoffmini_45
+  device_ip: 192.168.87.45
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+  manual_ip:
+    static_ip: ${device_ip}
+    gateway: 192.168.86.1
+    subnet: 255.255.255.0
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "ESPHOME"
+    password: "12345678"
+
+logger:
+  
+api:
+  reboot_timeout: 15min
+
+ota:
+
+# the web_server & sensor components can be removed without affecting core functionaility.
+
+web_server:
+  port: 80
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name} Wifi Signal Strength
+    update_interval: 60s
+  - platform: uptime
+    name: ${device_name} Uptime
+
+#######################################
+# Device specific Config Begins Below #
+#######################################
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO00 # The built-in switch
+    id: reset
+    internal: true
+    filters:
+      - invert:
+      - delayed_off: 10ms
+    on_press:
+      - switch.toggle:
+          id: relay_1
+
+  - platform: gpio
+    name: ${device_name}_status
+    pin: GPIO04 # The external terminals
+    id: switch_1
+    filters:
+      - delayed_on: 100ms
+    on_press:
+      then:
+        - switch.toggle:
+            id: relay_1
+            #    on_release:
+            #      then:
+            #        - switch.toggle:
+            #            id: relay_1
+
+switch:
+  - platform: gpio
+    name: ${device_name}_switch
+    icon: "mdi: lightbulb_outline"
+    pin: GPIO12
+    id: relay_1
+    restore_mode: restore_default_off
+
+status_led:
+  pin:
+    number: GPIO13
+    inverted: true
+
+output:
+  - platform: esp8266_pwm
+    id: blue_led
+    pin: GPIO13
+    inverted: True
+
+light:
+  # the 4 lines below define the Blue LED light on Sonoff Mini, to expose in HomeAssistant remove line "internal: true"
+  - platform: monochromatic
+    name: ${device_name}_blueled
+    output: blue_led
+    internal: true # hides the Blue LED from HomeAssistant

tkm1.yaml

@@ -0,0 +1,89 @@
+esphome:
+  name: nightstandtkm
+
+esp8266:
+  board: esp8285
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "EgFzta0ZRgjSLEAfkzFDFlzs2ZDcs+2sD5LL7vSHSmE="
+
+ota:
+  - platform: esphome
+
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Nightstand Tkm Fallback Hotspot"
+    password: "EK3tBJRGRsuQ"
+
+captive_portal:
+    
+
+#######################################
+# Device specific Config Begins Below #
+#######################################
+substitutions:
+  device_name: nightstandtkm
+  #device_ip: 192.168.87.45
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO00 # The built-in switch
+    id: reset
+    internal: true
+    filters:
+      - invert:
+      - delayed_off: 10ms
+    on_press:
+      - switch.toggle:
+          id: relay_1
+
+  - platform: gpio
+    name: ${device_name}_status
+    pin: GPIO04 # The external terminals
+    id: switch_1
+    filters:
+      - delayed_on: 100ms
+    on_press:
+      then:
+        - switch.toggle:
+            id: relay_1
+            #    on_release:
+            #      then:
+            #        - switch.toggle:
+            #            id: relay_1
+
+switch:
+  - platform: gpio
+    name: ${device_name}_switch
+    icon: "mdi:lightbulb_outline"
+    pin: GPIO12
+    id: relay_1
+    restore_mode: restore_default_off
+
+#status_led:
+#  pin:
+#    number: GPIO13
+#    inverted: true
+
+output:
+  - platform: esp8266_pwm
+    id: blue_led
+    pin: GPIO13
+    inverted: True
+
+light:
+  # the 4 lines below define the Blue LED light on Sonoff Mini, to expose in HomeAssistant remove line "internal: true"
+  - platform: monochromatic
+    name: ${device_name}_blueled
+    output: blue_led
+    internal: true # hides the Blue LED from HomeAssistant

tkm2.yaml

@@ -0,0 +1,29 @@
+esphome:
+  name: tkm3
+
+esp8266:
+  board: esp8285
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "RxgR/v9F6OQQmn37bnfqvgWlb2Img/TXKPFrHV88Cu8="
+
+ota:
+  - platform: esphome
+
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Tkm3 Fallback Hotspot"
+    password: "NaluQQJ7i0Ld"
+
+captive_portal:
+