tim/ESPHome
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Added a new bedroom button box.

Browse Source
This commit is contained in:
Tim Meneely
2021-02-10 10:29:13 -05:00
parent afe3fba217
commit 81f44bbea4
5 changed files with 201 additions and 68 deletions
Download Patch File Download Diff File Expand all files Collapse all files

70
bedroom_lilygo_t7v13.yaml Normal file
View File

@@ -0,0 +1,70 @@
substitutions:
device_name: bedroom_tkm_lily2
device_ip: 192.168.87.47
esphome:
name: ${device_name}
platform: ESP32
board: esp32dev
on_boot:
- priority: 900 #900 tried down to 500
then:
- lambda: |-
id(wake_up_reason) = log(esp_sleep_get_ext1_wakeup_status())/log(2);
<<: !include standard_wifi.yaml
logger:
level: INFO
api:
ota:
<<: !include standard_mqtt_deepsleep.yaml
deep_sleep:
run_duration: 20s
sleep_duration: 40s #24h
esp32_ext1_wakeup:
pins:
- 33 #middle button
- 34 #T button
- 35 #L button
mode: ANY_HIGH
id: deep_sleep_1
globals:
- id: wake_up_reason
type: int
restore_value: no
initial_value: '0'
sensor:
- platform: template
name: "Remote Control Wake Reason"
accuracy_decimals: 0
lambda: |-
return id(wake_up_reason);
binary_sensor:
- platform: gpio
pin:
number: GPIO33
mode: INPUT_PULLUP
filters:
- delayed_on: 100ms ### <---- debounce time, was 100ms
# - delayed_off: 10s ### <---- delay to capture state change on wake up
name: "TKM Test 33 middle button"
id: tkm_test_33
- platform: gpio
pin:
number: GPIO34
mode: INPUT_PULLUP
filters:
- delayed_on: 100ms ### <---- debounce time, was 100ms
# - delayed_off: 10s ### <---- delay to capture state change on wake up
name: "TKM Test 34 T button"
id: tkm_test_34
- platform: gpio
pin:
number: GPIO35
mode: INPUT_PULLUP
filters:
- delayed_on: 100ms ### <---- debounce time, was 100ms
name: "TKM Test 35 L button"
id: tkm_test35

88
bedroom_tkm1.yaml
View File

@@ -3,62 +3,36 @@ esphome:
platform: ESP32
board: wemos_d1_mini32 #esp-wrover-kit
on_boot:
- priority: -100 #900 tried down to 500
then:
- lambda: |-
id(wake_up_reason1) = esp_sleep_get_ext1_wakeup_status();
- priority: 900 #900 tried down to 500
then:
- lambda: |-
id(wake_up_reason) = esp_sleep_get_ext1_wakeup_status();
#esp_default_wake_deep_sleep();
#id(wake_up_reason) = log(esp_sleep_get_ext1_wakeup_status())/log(2);
# - priority: 300.0 # after sensor setup, before WIFI initialization
# then:
# - light.turn_on:
# id: emergency_light
# brightness: 100%
# red: 100%
# green: 0%
# blue: 0%
# - priority: 225.0 # after WIFI initialization
# then:
# - light.turn_on:
# id: emergency_light
# brightness: 100%
# red: 0%
# green: 0%
# blue: 100%
# - priority: 901 #900 tried down to 500
# then:
# - lambda: |-
# esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
# gpio_pullup_dis(GPIO_NUM_33);
# gpio_pulldown_en(GPIO_NUM_33);
# gpio_pullup_dis(GPIO_NUM_34);
# gpio_pulldown_en(GPIO_NUM_34);
# gpio_pullup_dis(GPIO_NUM_35);
# gpio_pulldown_en(GPIO_NUM_35);
wifi:
ssid: "Meneely"
password: "punxsutawney1"
# Enable fallback hotspot (captive portal) in case wifi connection fails
# ap:
# ssid: "BigBlue1 Fallback Hotspot"
# password: "QNWj7LmaNoD6"
manual_ip:
# Set this to the IP of the ESP
static_ip: 192.168.87.36
# Set this to the IP address of the router. Often ends with .1
gateway: 192.168.86.1
# The subnet of the network. 255.255.255.0 works for most home networks.
subnet: 255.255.254.0
fast_connect: True
# captive_portal:
# Enable logging
logger:
level: INFO
# Enable Home Assistant API
api:
ota:
mqtt:
@@ -84,9 +58,9 @@ deep_sleep:
sleep_duration: 40s #24h
esp32_ext1_wakeup:
pins:
- 4 #yellow
- 12 #orange
- 32 #green
- 33 #yellow
- 34 #orange
- 35 #white
mode: ANY_HIGH
id: deep_sleep_1
@@ -95,50 +69,32 @@ globals:
type: int
restore_value: no
initial_value: '0'
- id: wake_up_reason1
type: int
restore_value: no
initial_value: '0'
sensor:
- platform: template
name: "Remote Control Wake Reason"
accuracy_decimals: 0
lambda: |-
return id(wake_up_reason);
- platform: template
name: "Remote Control Wake Reason1"
accuracy_decimals: 0
lambda: |-
return id(wake_up_reason1);
# on_value:
# then:
# - if:
# condition:
# lambda: 'return id(wake_up_reason) == 4;'
# then:
# - logger.log: "4, yellow wire touched"
# else:
# - logger.log: "Non-yellow wire touched"
binary_sensor:
- platform: gpio
pin:
number: GPIO4
number: GPIO33
mode: INPUT_PULLUP
# filters:
# - delayed_on: 10ms ### <---- debounce time, was 100ms
# - delayed_off: 10s ### <---- delay to capture state change on wake up
name: "TKM Test 4 (yellow)"
id: tkm_test_4
name: "TKM Test 33 (yellow)"
id: tkm_test_33
- platform: gpio
pin:
number: GPIO12
number: GPIO34
mode: INPUT_PULLUP
name: "TKM Test 12 (orange)"
id: tkm_test_12
name: "TKM Test 34 (orange)"
id: tkm_test_34
- platform: gpio
pin:
number: GPIO32
number: GPIO35
mode: INPUT_PULLUP
name: "TKM Test 32 (green)"
id: tkm_test32
name: "TKM Test 35 (white)"
id: tkm_test_35

100
bedroom_tkm2.yaml Normal file
View File

@@ -0,0 +1,100 @@
esphome:
name: bedroom_tkm1
platform: ESP32
board: wemos_d1_mini32 #esp-wrover-kit
on_boot:
- priority: 900 #900 tried down to 500
then:
- lambda: |-
id(wake_up_reason) = esp_sleep_get_ext1_wakeup_status();
# - priority: 901 #900 tried down to 500
# then:
# - lambda: |-
# esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
# gpio_pullup_dis(GPIO_NUM_33);
# gpio_pulldown_en(GPIO_NUM_33);
# gpio_pullup_dis(GPIO_NUM_34);
# gpio_pulldown_en(GPIO_NUM_34);
# gpio_pullup_dis(GPIO_NUM_35);
# gpio_pulldown_en(GPIO_NUM_35);
wifi:
ssid: "Meneely"
password: "punxsutawney1"
manual_ip:
static_ip: 192.168.87.36
gateway: 192.168.86.1
subnet: 255.255.254.0
fast_connect: True
# captive_portal:
logger:
level: INFO
api:
ota:
mqtt:
broker: 192.168.86.99
discovery: True
username: ha
password: lorrie
# keepalive: 2s
birth_message:
topic: bedroom_tkm1/status
payload: coming_online_birth
will_message:
topic: bedroom_tkm1/status
payload: going_offline_will
on_message:
topic: bedroom_tkm1/ota_mode
payload: 'ON'
then:
- deep_sleep.prevent: deep_sleep_1
deep_sleep:
run_duration: 20s
sleep_duration: 40s #24h
esp32_ext1_wakeup:
pins:
- 33 #yellow
- 34 #orange
- 35 #white
mode: ANY_HIGH
id: deep_sleep_1
globals:
- id: wake_up_reason
type: int
restore_value: no
initial_value: '0'
sensor:
- platform: template
name: "Remote Control Wake Reason"
accuracy_decimals: 0
lambda: |-
return id(wake_up_reason);
binary_sensor:
- platform: gpio
pin:
number: GPIO33
mode: INPUT_PULLUP
# filters:
# - delayed_on: 10ms ### <---- debounce time, was 100ms
# - delayed_off: 10s ### <---- delay to capture state change on wake up
name: "TKM Test 33 (yellow)"
id: tkm_test_33
- platform: gpio
pin:
number: GPIO34
mode: INPUT_PULLUP
name: "TKM Test 34 (orange)"
id: tkm_test_34
- platform: gpio
pin:
number: GPIO35
mode: INPUT_PULLUP
name: "TKM Test 35 (white)"
id: tkm_test_35

6
bedroom_tkm_lily2/partitions.csv Normal file
View File

@@ -0,0 +1,6 @@
nvs, data, nvs, 0x009000, 0x005000,
otadata, data, ota, 0x00e000, 0x002000,
app0, app, ota_0, 0x010000, 0x1C0000,
app1, app, ota_1, 0x1D0000, 0x1C0000,
eeprom, data, 0x99, 0x390000, 0x001000,
spiffs, data, spiffs, 0x391000, 0x00F000
1 nvs, data, nvs, 0x009000, 0x005000,
2 otadata, data, ota, 0x00e000, 0x002000,
3 app0, app, ota_0, 0x010000, 0x1C0000,
4 app1, app, ota_1, 0x1D0000, 0x1C0000,
5 eeprom, data, 0x99, 0x390000, 0x001000,
6 spiffs, data, spiffs, 0x391000, 0x00F000

3
chip_list_esp32.txt
View File

@@ -2,6 +2,7 @@ Name in ESPHome IP assigned Board Chip ID
bigblue1 192.168.87.31 ESP32/esp-wrover-kit ESP32D0WDQ5 (revision 1) Battery shield, 18650
bedroom_tkm1 192.168.87.36 ESP32/wemos_d1_mini32 ESP32D0WDQ6 (revision 1) D1 mini, 4xAmazon 2021-01-20. Doesn't give pin ID used to wake from deep sleep
esp32_cam1 192.168.87.17 ESP32/esp32cam ESP32-CAM, 2xAmazon 2020-12-17
bedroom_tkm_lily1 192.168.87.44 ESP32 LilyGo T7 V1.5, with USB and battery
sonoffmini_1 192.168.87.41 ESP8266/esp01_1m Sonoff Mini - Now on Tim's nightstand
bedroom_tkm_lily1 192.168.87.44 esp32dev ESP32 LilyGo T7 V1.5, with USB and battery
sonoffmini_45 192.168.87.45 ESP8266/esp01_1m Sonoff Mini - Now on Lorrie's nightstand
bedroom_tkm_lily2 192.168.87.47 esp32dev ESP32 LilyGo T7 V1.3, with USB and battery