diff --git a/bedroom_tkm1cam.yaml b/bedroom_tkm1cam.yaml
new file mode 100644
index 0000000..3f11e8f
--- /dev/null
+++ b/bedroom_tkm1cam.yaml
@@ -0,0 +1,124 @@
+esphome:
+  name: bedroom_tkm1
+  platform: ESP32
+  board: esp32cam
+  on_boot:
+    - priority: -100 #900 tried down to 500
+      then:
+        - lambda: |-
+            id(wake_up_reason1) = esp_sleep_get_ext1_wakeup_status();
+    - priority: 900 #900 tried down to 500
+      then:
+        - lambda: |-
+            id(wake_up_reason) = esp_sleep_get_ext1_wakeup_status();
+
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  # ap:
+  #   ssid: "BigBlue1 Fallback Hotspot"
+  #   password: "QNWj7LmaNoD6"
+  manual_ip:
+    # Set this to the IP of the ESP
+    static_ip: 192.168.87.36
+    # Set this to the IP address of the router. Often ends with .1
+    gateway: 192.168.86.1
+    # The subnet of the network. 255.255.255.0 works for most home networks.
+    subnet: 255.255.254.0
+  fast_connect: True
+
+# captive_portal:
+
+# Enable logging
+logger:
+    level: INFO
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+mqtt:
+  broker: 192.168.86.99
+  discovery: True
+  username: ha
+  password: lorrie
+  # keepalive: 2s
+  birth_message:
+          topic: bedroom_tkm1cam/status
+          payload: coming_online_birth
+  will_message:
+          topic: bedroom_tkm1cam/status
+          payload: going_offline_will
+  on_message:
+    topic: bedroom_tkm1/ota_mode
+    payload: 'ON'
+    then:
+      - deep_sleep.prevent: deep_sleep_1
+
+deep_sleep:
+        run_duration: 20s
+        sleep_duration: 40s #24h
+        esp32_ext1_wakeup: 
+                pins: 
+                  - 13 #yellow
+                  - 12 #orange
+                  - 15 #green
+                mode: ANY_HIGH
+        id: deep_sleep_1
+
+globals:
+        - id: wake_up_reason
+          type: int
+          restore_value: no
+          initial_value: '0'
+        - id: wake_up_reason1
+          type: int
+          restore_value: no
+          initial_value: '0'
+sensor:
+  - platform: template
+    name: "Remote Control Wake Reason"
+    accuracy_decimals: 0
+    lambda: |-
+            return id(wake_up_reason);
+  - platform: template
+    name: "Remote Control Wake Reason1"
+    accuracy_decimals: 0
+    lambda: |-
+            return id(wake_up_reason1);
+    # on_value:
+    #   then:
+    #     - if:
+    #         condition:
+    #           lambda: 'return id(wake_up_reason) == 4;'
+    #         then:
+    #           - logger.log: "4, yellow wire touched"
+    #         else:
+    #           - logger.log: "Non-yellow wire touched"
+
+binary_sensor:
+  - platform: gpio
+    pin: 
+        number: GPIO13
+        mode: INPUT_PULLUP
+    # filters:
+      # - delayed_on: 10ms ### <---- debounce time, was 100ms
+      # - delayed_off: 10s ### <---- delay to capture state change on wake up         
+    name: "TKM Test 13 (yellow)"
+    id: tkm_test_13
+  - platform: gpio
+    pin: 
+        number: GPIO12
+        mode: INPUT_PULLUP
+    name: "TKM Test 12 (orange)"
+    id: tkm_test_12
+  - platform: gpio
+    pin: 
+        number: GPIO15
+        mode: INPUT_PULLUP
+    name: "TKM Test 15 (green)"
+    id: tkm_test15
diff --git a/sonoff_mini1.yaml b/sonoff_mini1.yaml
new file mode 100644
index 0000000..5b1eb4c
--- /dev/null
+++ b/sonoff_mini1.yaml
@@ -0,0 +1,94 @@
+substitutions:
+  device_name: sonoffmini_1
+  device_ip: 192.168.87.41
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+  manual_ip:
+    static_ip: ${device_ip}
+    gateway: 192.168.86.1
+    subnet: 255.255.255.0
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "ESPHOME"
+    password: "12345678"
+
+logger:
+  
+api:
+  reboot_timeout: 15min
+
+ota:
+
+# the web_server & sensor components can be removed without affecting core functionaility.
+
+web_server:
+  port: 80
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name} Wifi Signal Strength
+    update_interval: 60s
+  - platform: uptime
+    name: ${device_name} Uptime
+
+#######################################
+# Device specific Config Begins Below #
+#######################################
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO00
+    id: reset
+    internal: true
+    filters:
+      - invert:
+      - delayed_off: 10ms
+    on_press:
+      - switch.toggle:
+          id: relay_1
+
+  - platform: gpio
+    name: ${device_name}_status
+    pin: GPIO04
+    id: switch_1
+    on_press:
+      then:
+        - switch.toggle:
+            id: relay_1
+    on_release:
+      then:
+        - switch.toggle:
+            id: relay_1
+
+switch:
+  - platform: gpio
+    name: ${device_name}_switch
+    icon: "mdi: lightbulb_outline"
+    pin: GPIO12
+    id: relay_1
+    restore_mode: restore_default_off
+
+status_led:
+  pin:
+    number: GPIO13
+    inverted: true
+
+output:
+  - platform: esp8266_pwm
+    id: blue_led
+    pin: GPIO13
+    inverted: True
+
+light:
+  # the 4 lines below define the Blue LED light on Sonoff Mini, to expose in HomeAssistant remove line "internal: true"
+  - platform: monochromatic
+    name: ${device_name}_blueled
+    output: blue_led
+    internal: true # hides the Blue LED from HomeAssistant
\ No newline at end of file
diff --git a/sonoff_mini2.yaml b/sonoff_mini2.yaml
new file mode 100644
index 0000000..9f0d952
--- /dev/null
+++ b/sonoff_mini2.yaml
@@ -0,0 +1,94 @@
+substitutions:
+  device_name: sonoffmini_2
+  device_ip: 192.168.87.42
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+  manual_ip:
+    static_ip: ${device_ip}
+    gateway: 192.168.86.1
+    subnet: 255.255.255.0
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "ESPHOME"
+    password: "12345678"
+
+logger:
+  
+api:
+  reboot_timeout: 15min
+
+ota:
+
+# the web_server & sensor components can be removed without affecting core functionaility.
+
+web_server:
+  port: 80
+
+sensor:
+  - platform: wifi_signal
+    name: ${device_name} Wifi Signal Strength
+    update_interval: 60s
+  - platform: uptime
+    name: ${device_name} Uptime
+
+#######################################
+# Device specific Config Begins Below #
+#######################################
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO00
+    id: reset
+    internal: true
+    filters:
+      - invert:
+      - delayed_off: 10ms
+    on_press:
+      - switch.toggle:
+          id: relay_1
+
+  - platform: gpio
+    name: ${device_name}_status
+    pin: GPIO04
+    id: switch_1
+    on_press:
+      then:
+        - switch.toggle:
+            id: relay_1
+    on_release:
+      then:
+        - switch.toggle:
+            id: relay_1
+
+switch:
+  - platform: gpio
+    name: ${device_name}_switch
+    icon: "mdi: lightbulb_outline"
+    pin: GPIO12
+    id: relay_1
+    restore_mode: restore_default_off
+
+status_led:
+  pin:
+    number: GPIO13
+    inverted: true
+
+output:
+  - platform: esp8266_pwm
+    id: blue_led
+    pin: GPIO13
+    inverted: True
+
+light:
+  # the 4 lines below define the Blue LED light on Sonoff Mini, to expose in HomeAssistant remove line "internal: true"
+  - platform: monochromatic
+    name: ${device_name}_blueled
+    output: blue_led
+    internal: true # hides the Blue LED from HomeAssistant