Catching up.

shelly1_1.yaml

@@ -0,0 +1,55 @@
+esphome:
+  name: shelly1_1
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+  power_save_mode: none
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Shelly1_1 Fallback Hotspot"
+    password: "QNWj7LmaNoD6"
+  manual_ip:
+    # Set this to the IP of the ESP
+    static_ip: 192.168.87.21
+    # Set this to the IP address of the router. Often ends with .1
+    gateway: 192.168.86.1
+    # The subnet of the network. 255.255.255.0 works for most home networks.
+    subnet: 255.255.254.0
+
+# Enable logging
+logger:
+    level: debug
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+# Device Specific Config
+output:
+  - platform: gpio
+    pin: GPIO4
+    id: shelly_1_relay
+
+light:
+  - platform: binary
+    name: "Living Room Light (Shelly)"
+    output: shelly_1_relay
+    id: lightid
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO5
+      #mode: INPUT_PULLUP
+      #inverted: True
+    name: "Switch Shelly 1"
+    on_state:
+      then:
+        - light.toggle: lightid
+    internal: true
+    id: switchid