Catching up.

purple2.yaml

@@ -0,0 +1,54 @@
+esphome:
+  name: purple2
+  platform: ESP8266
+  board: nodemcuv2
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Purple Fallback Hotspot"
+    password: "QNWj7LmaNoD6"
+  manual_ip:
+    # Set this to the IP of the ESP
+    static_ip: 192.168.87.11
+    # Set this to the IP address of the router. Often ends with .1
+    gateway: 192.168.86.1
+    # The subnet of the network. 255.255.255.0 works for most home networks.
+    subnet: 255.255.254.0
+
+captive_portal:
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+i2c:
+  sda: D2
+  scl: D1
+  scan: True
+  id: bus_a
+
+sensor:
+  - platform: bme280
+    temperature:
+      name: "Purple2_BME280 Temperature"
+      oversampling: 16x
+    pressure:
+      name: "Purple2_BME280 Pressure"
+    humidity:
+      name: "Purple2_BME280 Humidity"
+    address: 0x76
+    update_interval: 60s
+  - platform: bh1750
+    name: "Purple2_BH1750 Illuminance"
+    address: 0x23
+    measurement_time: 69
+    update_interval: 60s
+