Adding ip address.

lily11b.yaml

@@ -0,0 +1,84 @@
+esphome:
+  name: lily11
+  platform: ESP32
+  board: esp32dev
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Lily Fallback Hotspot"
+    password: "QNWj7LmaNoD6"
+  manual_ip:
+    # Set this to the IP of the ESP
+    static_ip: 192.168.87.11
+    # Set this to the IP address of the router. Often ends with .1
+    gateway: 192.168.86.1
+    # The subnet of the network. 255.255.255.0 works for most home networks.
+    subnet: 255.255.254.0
+
+captive_portal:
+
+# Enable logging
+logger:
+    level: debug
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+spi:
+  clk_pin: 18
+  mosi_pin: 23
+  miso_pin: 17
+
+time:
+  - platform: homeassistant
+    id: esptime
+
+font:
+  - file: "arial.ttf"
+    id: font_arial
+    size: 20
+  - file: "arial.ttf"
+    id: font_arialbig
+    size: 24
+  - file: "times.ttf"
+    id: font_times
+    size: 16
+  - file: "arial.ttf"
+    id: font_arialtiny
+    size: 7
+
+sensor:
+  - platform: homeassistant
+    id: timofficetemperature
+    internal: true
+    entity_id: sensor.tim_office_temperature
+  - platform: homeassistant
+    id: bedroomtemperature
+    internal: true
+    entity_id: sensor.bedroomtemperature
+
+#Dimensions: 122 x 250
+display:
+  - platform: waveshare_epaper
+    cs_pin: 5
+    dc_pin: 17
+    busy_pin: 4 
+    reset_pin: 16
+    model: 2.13in-ttgo-b73
+    id: display_update
+    update_interval: 30s
+    full_update_every: 30
+    rotation: 90°
+    lambda: |-
+      it.strftime(250, 0, id(font_arialbig), TextAlign::TOP_RIGHT, "%a %b %e %l:%M %P", id(esptime).now());
+      it.line(0,25,250,25);
+      it.printf(0, 34, id(font_arial), "Office: %.1f°F", id(timofficetemperature).state);
+      it.printf(0, 54, id(font_arial), "Bedroom: %.1f°F", id(bedroomtemperature).state);
+      it.printf(150, 115, id(font_arialtiny), "192.168.87.11");
+