diff --git a/lily15.yaml b/lily15.yaml
index 68b3d61..ee0352b 100644
--- a/lily15.yaml
+++ b/lily15.yaml
@@ -9,7 +9,7 @@ wifi:
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
-    ssid: "Lily Fallback Hotspot"
+    ssid: "Lily15 Fallback Hotspot"
     password: "QNWj7LmaNoD6"
   manual_ip:
     # Set this to the IP of the ESP
@@ -22,14 +22,36 @@ wifi:
 captive_portal:
 
 # Enable logging
-logger:
-    level: debug
+#logger:
+#    level: debug
 
 # Enable Home Assistant API
 api:
 
 ota:
 
+deep_sleep:
+  run_duration: 30sec
+  sleep_duration: 1min
+  id: deep_sleep_1
+
+mqtt:
+  broker: 192.168.86.99
+  username: ha
+  password: lorrie
+  on_message:
+    topic: lily15/ota_mode
+    payload: 'ON'
+    then:
+      - deep_sleep.prevent: deep_sleep_1
+
+text_sensor:
+  - platform: mqtt_subscribe
+    name: "Data from topic"
+    id: mqttsensor
+    topic: the/topic
+
+
 spi:
   clk_pin: 18
   mosi_pin: 23
@@ -46,9 +68,12 @@ font:
   - file: "arial.ttf"
     id: font_arialbig
     size: 24
-  - file: "times.ttf"
-    id: font_times
-    size: 16
+#  - file: "times.ttf"
+#    id: font_times
+#    size: 16
+  - file: "arial.ttf"
+    id: font_arialtiny
+    size: 10
 
 sensor:
   - platform: homeassistant
@@ -59,6 +84,10 @@ sensor:
     id: bedroomtemperature
     internal: true
     entity_id: sensor.bedroomtemperature
+  - platform: homeassistant
+    id: backyardtemperature
+    internal: true
+    entity_id: sensor.backyardtemperature
 
 #Dimensions: 122 x 250
 display:
@@ -69,11 +98,15 @@ display:
     reset_pin: 16
     model: 2.13in-ttgo-b73
     id: display_update
-    update_interval: 30s
-    full_update_every: 30
+    update_interval: 10s
+    full_update_every: 300
     rotation: 90°
     lambda: |-
-      it.strftime(250, 0, id(font_arialbig), TextAlign::TOP_RIGHT, "%a %b %e %l:%M %P", id(esptime).now());
+      it.strftime(125, 0, id(font_arialbig), TextAlign::TOP_CENTER, "%a %b %e %l:%M %P", id(esptime).now());
       it.line(0,25,250,25);
-      it.printf(0, 34, id(font_arial), "Office: %.1f°F", id(timofficetemperature).state);
-      it.printf(0, 54, id(font_arial), "Bedroom: %.1f°F", id(bedroomtemperature).state);
+      it.printf(0, 37, id(font_arial), "Tim office: %.1f°F", id(timofficetemperature).state);
+      it.printf(0, 57, id(font_arial), "Bedroom: %.1f°F", id(bedroomtemperature).state);
+      it.printf(0, 77, id(font_arial), "Outside: %.1f°F", id(backyardtemperature).state);
+      it.printf(0, 97, id(font_arial), "MQTT message: %s", id(mqttsensor).state.c_str());
+      it.printf(125, 132, id(font_arialtiny), TextAlign::BOTTOM_CENTER,  "192.168.87.15");
+ 
diff --git a/purple2.yaml b/purple2.yaml
new file mode 100644
index 0000000..0cbb982
--- /dev/null
+++ b/purple2.yaml
@@ -0,0 +1,54 @@
+esphome:
+  name: purple2
+  platform: ESP8266
+  board: nodemcuv2
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Purple Fallback Hotspot"
+    password: "QNWj7LmaNoD6"
+  manual_ip:
+    # Set this to the IP of the ESP
+    static_ip: 192.168.87.11
+    # Set this to the IP address of the router. Often ends with .1
+    gateway: 192.168.86.1
+    # The subnet of the network. 255.255.255.0 works for most home networks.
+    subnet: 255.255.254.0
+
+captive_portal:
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+i2c:
+  sda: D2
+  scl: D1
+  scan: True
+  id: bus_a
+
+sensor:
+  - platform: bme280
+    temperature:
+      name: "Purple2_BME280 Temperature"
+      oversampling: 16x
+    pressure:
+      name: "Purple2_BME280 Pressure"
+    humidity:
+      name: "Purple2_BME280 Humidity"
+    address: 0x76
+    update_interval: 60s
+  - platform: bh1750
+    name: "Purple2_BH1750 Illuminance"
+    address: 0x23
+    measurement_time: 69
+    update_interval: 60s
+   
diff --git a/requirements.txt b/requirements.txt
new file mode 100644
index 0000000..2016db0
--- /dev/null
+++ b/requirements.txt
@@ -0,0 +1,34 @@
+bitstring>=3.1.7
+bottle>=0.12.18
+certifi>=2020.6.20
+cffi>=1.14.4
+chardet>=3.0.4
+click>=7.1.2
+colorama>=0.4.4
+colorlog>=4.2.1
+cryptography>=3.3.1
+ecdsa>=0.16.0
+esphome>=1.15.3
+esptool>=2.8
+idna>=2.10
+ifaddr>=0.1.7
+marshmallow>=3.8.0
+paho-mqtt>=1.5.0
+Pillow>=8.0.0
+platformio>=4.3.4
+protobuf>=3.12.2
+pyaes>=1.6.1
+pycparser>=2.20
+pyelftools>=0.26
+pyserial>=3.4
+pytz>=2020.1
+PyYAML>=5.3.1
+reedsolo>=1.5.4
+requests>=2.24.0
+semantic-version>=2.8.5
+six>=1.15.0
+tabulate>=0.8.7
+tornado>=6.0.4
+tzlocal>=2.1
+urllib3>=1.25.11
+voluptuous>=0.11.7
diff --git a/requirements20201215.txt b/requirements20201215.txt
new file mode 100644
index 0000000..f2f8f25
--- /dev/null
+++ b/requirements20201215.txt
@@ -0,0 +1,35 @@
+bitstring==3.1.7
+bottle==0.12.19
+certifi==2020.12.5
+cffi==1.14.4
+chardet==4.0.0
+click==7.1.2
+colorama==0.4.4
+colorlog==4.6.2
+cryptography==3.3.1
+ecdsa==0.16.1
+esphome==1.15.3
+esptool==3.0
+idna==2.10
+ifaddr==0.1.7
+marshmallow==3.9.1
+paho-mqtt==1.5.1
+Pillow==8.0.1
+pkg-resources==0.0.0
+platformio==5.0.3
+protobuf==3.14.0
+pyaes==1.6.1
+pycparser==2.20
+pyelftools==0.27
+pyserial==3.5
+pytz==2020.4
+PyYAML==5.3.1
+reedsolo==1.5.4
+requests==2.25.0
+semantic-version==2.8.5
+six==1.15.0
+tabulate==0.8.7
+tornado==6.1
+tzlocal==2.1
+urllib3==1.26.2
+voluptuous==0.12.1
diff --git a/shelly1_1.yaml b/shelly1_1.yaml
new file mode 100644
index 0000000..ed3576c
--- /dev/null
+++ b/shelly1_1.yaml
@@ -0,0 +1,55 @@
+esphome:
+  name: shelly1_1
+  platform: ESP8266
+  board: esp01_1m
+
+wifi:
+  ssid: "Meneely"
+  password: "punxsutawney1"
+  power_save_mode: none
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Shelly1_1 Fallback Hotspot"
+    password: "QNWj7LmaNoD6"
+  manual_ip:
+    # Set this to the IP of the ESP
+    static_ip: 192.168.87.21
+    # Set this to the IP address of the router. Often ends with .1
+    gateway: 192.168.86.1
+    # The subnet of the network. 255.255.255.0 works for most home networks.
+    subnet: 255.255.254.0
+
+# Enable logging
+logger:
+    level: debug
+
+# Enable Home Assistant API
+api:
+
+ota:
+
+# Device Specific Config
+output:
+  - platform: gpio
+    pin: GPIO4
+    id: shelly_1_relay
+
+light:
+  - platform: binary
+    name: "Living Room Light (Shelly)"
+    output: shelly_1_relay
+    id: lightid
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO5
+      #mode: INPUT_PULLUP
+      #inverted: True
+    name: "Switch Shelly 1"
+    on_state:
+      then:
+        - light.toggle: lightid
+    internal: true
+    id: switchid
diff --git a/shelly1_orig.bin b/shelly1_orig.bin
new file mode 100644
index 0000000..5c1a795
Binary files /dev/null and b/shelly1_orig.bin differ
diff --git a/upload_purple b/upload_purple
new file mode 100644
index 0000000..6911579
--- /dev/null
+++ b/upload_purple
@@ -0,0 +1 @@
+esphome purple.yaml run --upload-port 192.168.87.11
diff --git a/upload_purple2 b/upload_purple2
new file mode 100644
index 0000000..49ff724
--- /dev/null
+++ b/upload_purple2
@@ -0,0 +1 @@
+esphome purple2.yaml run --upload-port 192.168.87.11
diff --git a/write_purple2 b/write_purple2
new file mode 100644
index 0000000..b1264a6
--- /dev/null
+++ b/write_purple2
@@ -0,0 +1 @@
+esphome purple2.yaml run --upload-port /dev/ttyS5
diff --git a/write_shelly1 b/write_shelly1
new file mode 100644
index 0000000..dc9a522
--- /dev/null
+++ b/write_shelly1
@@ -0,0 +1 @@
+esphome shelly1_1.yaml run --upload-port /dev/ttyS5