Working

chip_list_esp32.txt

@@ -8,3 +8,4 @@ sonoffmini_45       192.168.87.45   ESP8266/esp01_1m
 bedroom_tkm_lily2   192.168.87.47   esp32dev                                            ESP32 LilyGo T7 V1.3, with USB and battery
 bedroom_tkm_lily1   192.168.87.48   esp32dev                                            ESP32 LilyGo T7 V1.5, with USB and battery
 lr_bright_87_49     192.168.87.49   ESP32/wemos_d1_mini32
+rf_bridge_87_60     192.168.87.60   esp01_1m                                            Sonoff RF bridge

rf_bridge_87_60.yaml

@@ -0,0 +1,273 @@
+substitutions:
+  device_name: rf_bridge_87_60
+  device_ip: 192.168.87.60
+
+esphome:
+  name: ${device_name}
+  platform: ESP8266
+  board: esp01_1m
+
+<<: !include standard_wifi.yaml
+
+captive_portal:
+
+# Enable logging
+logger:
+  baud_rate: 0
+
+ota:
+web_server:
+  port: 80
+
+api:
+  services:
+    - service: send_rf_code
+      variables:
+        sync: int
+        low: int
+        high: int
+        code: int
+      then:
+        - rf_bridge.send_code:
+            sync: !lambda 'return sync;'
+            low: !lambda 'return low;'
+            high: !lambda 'return high;'
+            code: !lambda 'return code;'
+    - service: learn
+      then:
+        - rf_bridge.learn
+    - service: start_advanced_sniff
+      then:
+        - rf_bridge.start_advanced_sniffing
+    - service: stop_advanced_sniff
+      then:
+        - rf_bridge.stop_advanced_sniffing
+uart:
+  tx_pin: GPIO01
+  rx_pin: GPIO03
+  baud_rate: 19200
+
+sensor:
+  - platform: wifi_signal
+    name: "${device_name} Wifi Signal Strength"
+    update_interval: 60s
+  - platform: uptime
+    name: "${device_name} Uptime"
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO00
+      inverted: True
+    name: "${device_name} Pairing Button"
+
+status_led:
+  pin:
+    number: GPIO13
+    inverted: yes
+
+switch:
+- platform: restart
+  name: "${device_name} REBOOT"
+
+rf_bridge:
+  on_code_received:
+    then:
+      - homeassistant.event:
+          event: esphome.rf_code_received
+          data:
+            sync: !lambda 'char buffer [10];return itoa(data.sync,buffer,16);'
+            low: !lambda 'char buffer [10];return itoa(data.low,buffer,16);'
+            high: !lambda 'char buffer [10];return itoa(data.high,buffer,16);'
+            code: !lambda 'char buffer [10];return itoa(data.code,buffer,16);'
+
+  on_advanced_code_received:
+  - homeassistant.event:
+      event: esphome.rf_advanced_code_received
+      data:
+        length: !lambda 'char buffer [10];return itoa(data.length,buffer,16);'
+        protocol: !lambda 'char buffer [10];return itoa(data.protocol,buffer,16);'
+        code: !lambda 'return data.code;'
+
+
+# api:
+#   services:
+#     - service: send_rf_code
+#       variables:
+#         sync: int
+#         low: int
+#         high: int
+#         code: int
+#       then:
+#         - rf_bridge.send_code:
+#             sync: !lambda 'return sync;'
+#             low: !lambda 'return low;'
+#             high: !lambda 'return high;'
+#             code: !lambda 'return code;'
+#     - service: learn
+#       then:
+#         - rf_bridge.learn
+
+# uart:
+#   tx_pin: 1
+#   rx_pin: 3
+#   baud_rate: 19200
+
+# logger:
+#   baud_rate: 0
+
+# rf_bridge:
+#   on_code_received:
+#     then:
+#       - homeassistant.event:
+#           event: esphome.rf_code_received
+#           data:
+#             sync: !lambda 'char buffer [10];return itoa(data.sync,buffer,16);'
+#             low: !lambda 'char buffer [10];return itoa(data.low,buffer,16);'
+#             high: !lambda 'char buffer [10];return itoa(data.high,buffer,16);'
+#             code: !lambda 'char buffer [10];return itoa(data.code,buffer,16);'
+
+# Example configuration entry
+# uart:
+#   baud_rate: 19200
+
+# rf_bridge:
+#   on_code_received:
+#     - homeassistant.event:
+#         event: esphome.rf_code_received
+#         data:
+#           sync: !lambda 'char buffer [10];return itoa(data.sync,buffer,16);'
+#           low: !lambda 'char buffer [10];return itoa(data.low,buffer,16);'
+#           high: !lambda 'char buffer [10];return itoa(data.high,buffer,16);'
+#           code: !lambda 'char buffer [10];return itoa(data.code,buffer,16);'            
+  # on_advanced_code_received:
+  #   then:
+  #     - homeassistant.event:
+  #         event: esphome.rf_advanced_code_received
+  #         data:
+  #           length: !lambda 'char buffer [10];return itoa(data.length,buffer,16);'
+  #           protocol: !lambda 'char buffer [10];return itoa(data.protocol,buffer,16);'
+  #           code: !lambda 'return data.code;'
+
+
+
+# api:
+#   services:
+#     - service: send_rf_code
+#       variables:
+#         sync: int
+#         low: int
+#         high: int
+#         code: int
+#       then:
+#         - rf_bridge.send_code:
+#             sync: !lambda 'return sync;'
+#             low: !lambda 'return low;'
+#             high: !lambda 'return high;'
+#             code: !lambda 'return code;'
+#     - service: learn
+#       then:
+#         - rf_bridge.learn
+
+# ota:
+
+# uart:
+#   tx_pin: 1
+#   rx_pin: 3
+#   baud_rate: 19200
+
+# logger:
+#   baud_rate: 0
+
+# rf_bridge:
+#   on_code_received:
+#     then:
+#       - homeassistant.event:
+#           event: esphome.rf_code_received
+#           data:
+#             sync: !lambda 'char buffer [10];return itoa(data.sync,buffer,16);'
+#             low: !lambda 'char buffer [10];return itoa(data.low,buffer,16);'
+#             high: !lambda 'char buffer [10];return itoa(data.high,buffer,16);'
+#             code: !lambda 'char buffer [10];return itoa(data.code,buffer,16);'
+# Basic Config
+
+# Device Specific Config
+
+# binary_sensor:
+#   - platform: status
+#     name: "RF Bridge Status"
+
+
+
+
+
+# use esphome log viewer to get binary transmission for sensor state.  Below are examples when using either single state or dual state sensors.
+
+# # use this for single state sensors (single trigger)
+#   - platform: remote_receiver
+#     name: "Sensor1"
+#     rc_switch_raw:
+#       code: '100110011100011010101001'
+#       protocol: 1
+
+
+
+# # use this for dual state sensors (open/closed trigger)
+#   - platform: remote_receiver
+#     name: "Sensor 2 Open"
+#     internal: yes
+#     rc_switch_raw:
+#       code: '001111111110111100101110'
+#       protocol: 1
+#     on_press:
+#       - binary_sensor.template.publish:
+#           id: Sensor2
+#           state: ON
+#   - platform: remote_receiver
+#     name: "Sensor 2 Closed"
+#     internal: yes
+#     rc_switch_raw:
+#       code: '001111111110111100100111'
+#       protocol: 1
+#     on_press:
+#       - binary_sensor.template.publish:
+#           id: Sensor2
+#           state: OFF
+#   - platform: template
+#     name: "Sensor2 State"
+#     device_class: window
+#     id: Sensor2
+
+
+# remote_receiver:
+#   pin: 4
+# #  dump: all
+#   dump: rc_switch
+#   filter: 100us
+#   tolerance: 50%
+#   idle: 2ms
+
+# remote_transmitter:
+#   pin: 5
+#   carrier_duty_percent: 100%
+
+# status_led:
+#   pin:
+#     number: GPIO13
+#     inverted: yes
+
+
+# third section
+# Example configuration entry
+# uart:
+#   baud_rate: 19200
+
+# rf_bridge:
+#   on_code_received:
+#     - homeassistant.event:
+#         event: esphome.rf_code_received
+#         data:
+#           sync: !lambda 'char buffer [10];return itoa(data.sync,buffer,16);'
+#           low: !lambda 'char buffer [10];return itoa(data.low,buffer,16);'
+#           high: !lambda 'char buffer [10];return itoa(data.high,buffer,16);'
+#           code: !lambda 'char buffer [10];return itoa(data.code,buffer,16);'    

upload_rf_bridge

@@ -0,0 +1 @@
+esphome rf_bridge_87_60.yaml run --upload-port 192.168.87.60